PTFE (Sealon) Joint Sealant
| |
STYLE
1106 
|
 |
SEALON JOINT SEALANT
is a new marshmallow like product made of 100% PTFE(tetrafluoroethylene),
which is developed by highly specific treatment the PTFE
Fluorocarbon material.
SEALON JOINT SEALANT has high
tensile strength and flexible and tough properties, it has
no drawback as seen in existing gaskets. Playing a sealing
role firmly, easily and economically even under extremely
severe corrosive conditions, SEALON JOINT SEALANT is an
almighty gasket packing,oval in cross section and string
shape, with superior chemical and heat resistance. |
|
| |
| INSTALLATION |
| SEALON JOINT SEALANT
is a soft, pliable, flexible PTFE having an adhesive back
for ease of installation on vertical surfaces. |
| 1. |
Clean flange, removing
scale and other foreign materials. |
| 2. |
Strip off the Release
paper, push the adhesion surface at the center of flange
surface, and stick on there in a ring shape. |
| 3. |
Edge of it is overlapped
1 to 2cm at the bolt seat. |
| 4. |
Fix the flange to
the opponent and tighten each bolts uniformly, then
it is flattened ribbon-like to 1.5 times width and the
over lapped part is closely in contact. |
| |
| SEALON® is
a registered trademark of YMT |
|
|
|
 |
|
|
|
 |
|
|
|
|
|
Width |
Thickness |
Spool Length |
Metric |
English |
Metric |
Metric |
|
1/8"
3/16"
1/4"
3/8" |
|
30M
20M
15M
 8M |
14mm
17mm
20mm
25mm |
1/2"
5/8"
3/4"
1" |
|
|
Any
sizes can be quoted |
Round
type may also be requested |
|
| |
| SEALON® is a registered trademark
of YMT |
|