SEALON JOINT SEALANT
is a new marshmallow like product made of 100% PTFE(tetrafluoroethylene),
which is developed by highly specific treatment the PTFE
Fluorocarbon material.
SEALON JOINT SEALANT has high
tensile strength and flexible and tough properties, it has
no drawback as seen in existing gaskets. Playing a sealing
role firmly, easily and economically even under extremely
severe corrosive conditions, SEALON JOINT SEALANT is an
almighty gasket packing,oval in cross section and string
shape, with superior chemical and heat resistance.
FEATURES
ARE :
Saves
Time
Easier to install
self-adhering
Flanges part easily
No scraping for removal
Fills severe flange irregularities
Highly compressible
Only light flange bolting required
Long
Services
100%TFE
Resists cold flow and creep
No retorquing required
Pressures to 3,000psi
Temperatures from -450°F to
+600°F
Virtually inert to all corrosives
No age deterioration
Non-contaminating
Cost
Savings
No waste
No time spent cutting gaskets
Less downtime
Minimum inventory space
Minimum inventory required
No labor lost in retorquing
Longer lasting
Unlimited shelf life
APPLICATIONS
Flanges
Fume Ducts
Concrete Lids
Glass Joints
Heat Exchangers
Fibreglass Reinforced Plastic Vessels
Pump or Compressor Housing Flanges
Steam Vessel Flanges
Manhole Covers
Ceramic Joints
Hydraulic and Pneumatic Systems
Water Systems
Ventilation Duct and Fan Housing
--In short, practically all industrial
applications requiring a long life, troublefree
seal.
INSTALLATION
SEALON JOINT SEALANT
is a soft, pliable, flexible PTFE having an adhesive back
for ease of installation on vertical surfaces.
1.
Clean flange, removing
scale and other foreign materials.
2.
Strip off the Release
paper, push the adhesion surface at the center of flange
surface, and stick on there in a ring shape.
3.
Edge of it is overlapped
1 to 2cm at the bolt seat.
4.
Fix the flange to
the opponent and tighten each bolts uniformly, then
it is flattened ribbon-like to 1.5 times width and the
over lapped part is closely in contact.
