Style 1126 PTFE (Sealon) Gasket Sheet
- "H" Huge Sheet (2M x 2M, 77" x 77")
- "V" Rigid Sheet
- "L" Softer Sheet
 |
Style 1126 |
 |
Sealon sheet gasketing is made of 100% expanded P.T.F.E. by using special process that produces a uniform and highly fibrillated microstructure with a great lot of fibers running in multidirection. These create a soft and pliable, yet very tough gasket that has excellent resistance of pressing, creep relaxation and cold flow. It can seal the uneven and damaged flanges.
Sealon sheet gasketing possesses universal resistance against common chemicals, except melted alkali metal, fluorine at liquid and gas states. It is free from asbestos and other lung-intruding materials. It meets the FDA requirements, doesn't have any corrosion and is able to be stored without any time limits. |
| |
| FEATURES: |
|
 |
100% Pure P.T.F.E. |
|
Good sealability |
|
Good flexibility |
|
Highly
compressible |
|
Uniform and highly
fibrillated microstructure in multidirection |
|
Resistant to
creep and cold flow. |
|
Unaffected by
common chemicals,
pH range 0-14 |
|
Non-contaminating,
non-toxic. |
|
Meets FDA requirement
(FDA 21 CFR177. 1550) |
|
Using temperature
from-450°F to +500 °F , for short time up to
+600 °F |
|
Easy to cut and
install |
|
Low compressive
load to seal |
|
Can seal rough
or damaged flanges. |
| |
| Remarks: |
| Applicable fluids: Corrosive
fluid, acid, alkali, solvent, waste liquid and
oils. |
| Unapplicable fluids: Melted
alkali metal, fluorine at liquid and gas states. |
|
|
| |
| |
APPLICATIONS:
Can be used in virtually many types of sealing applications
throughout industry including:
- Chemical manufacturing
- Food equipment manufacturing
- Pharmaceutical plants
- Petrochemical production
- Steel manufacturing
|
- Distilling
- Food and beverage processing
- Pulp and paper processing
- Power generation
- Marine
|
|
| ALL
INDUSTRIAL APPLICATIONS REQUIRING A LONG LIFE, TROUBLE FREE
SEAL |
Temperature : 392°F
(200°C)
Time : 1 min
|
|
| |
|
| |
Strain
comparison of P.T.F.E. gasketing materials
Test conditions: Gasket load 3,600 psi for 24 hours st 500°F
(260°C) |
| |
|
BEFORE TESTING
Original sample:
I.D =50mm
O.D=86mm
t =1.5mm(1/16") |
AFTER TESTING
Sealon expanded sheet |
AFTER TESTING
P.T.F.E. sheet |
AFTER TESTING
Filled P.T.F.E. |
|
| |
Typical
physical properties*
SEALON® Expanded Sheet Gasketing |
| AVAILABLE
SIZES : |
| Sheet thickness: |
|
| 1/16" (=1.5mm), 1/18"
(=3.0mm) |
|
| Sheet size: |
|
| 60" x60" (=1,500mm x 1,500mm) |
|
| Thickness from 0.5mm to 6mm can
also be supplied. |
|
SEALON® is
a registered trademark of YMT. |
|
| *The
test results in accordance with ASTM are based on 0.8mm (1/32")
sheet thickness. |
|
