INERTEX®
EZ-Seal Insertable Gaskets
 INERTEX®
EZ-Seal Gaskets are designed with two things in mind: ease
of installation and maximum performance. The raised inner
portion of the EZ-Seal is manufactured to compress easily
irregularities,voids and micks, even on wire drawn flanges.
EZ-Seal Gaskets require less bolting stress to seal than conventional
PTFE envelope gaskets, plain PTFE gaskets or any filled PTFE
products on the market today. This feature makes EZ-Seals
the absolute best choice for glass lined or plastic flanges.
EZ-Seals can be used with all ANSI raised face flanges. EZ-Seal
Gaskets are easy to install in tight situations where only
minimal separation of flanges can be accomplished. Once installed,
EZ-Seal Gaskets provide a long and dependable service life
because they are made from 100% pure expanded PTFE. |
| |
| INERTEX®
HIGH PERFORMANC |
 |
100% expanded virgin PTFE |
|
Withstands a wide range of
temperatures from -450°F to +600°F |
|
Unaffected by common chemicals,
pH range,0-14 |
|
Non-contaminating, non-toxic
FDA suitable (FDA 21 CFR177.1550) |
|
Will not age, harden, shrink
or dry out in service |
|
Extremely strong; pressure
range from full vacuum to 3000 psi |
|
|
| |
| FEATURES |
| INERTEX®
EZ-Seal Gaskets can replace: |
|
PTFE envelope gaskets |
|
Plain PTFE gaskets |
|
Wire inserted molded PTFE
gaskets |
|
Asbestos and non-asbestos
gaskets |
|
Spiral wound gaskets |
|
Filled PTFE gaskets |
|
Rubber gaskets |
|
|
| |
LASTS
LONGER, SAVES TIME AND COST
100% expanded PTFE lasts much longer than any other gasket
material. When changing gaskets, INERTEX® EZ-Seals will
not stick to surfaces and can be easily removed. The EZ-Seal
comes in a sturdy protective package that protects the gasket
from damage until needed. |
|
|
|
STANDARD
AND CUSTOM SIZES FOR ANY NEED
|
 Use
EZ-Seals
of
This Size |
To fit and seal in these
flanges
|
| 1/2
x 150 |
1/2 x 150 |
|
|
|
| 1/2
x 300 |
|
1/2 x 300 |
1/2 x 400 |
1/2 x 600 |
| 3/4
x 150 |
3/4 x 150 |
|
|
|
| 3/4
x 300 |
|
3/4 x 300 |
3/4 x 400 |
3/4 x 600 |
| 1
x 150 |
1 x 150 |
|
|
|
| 1
x 300 |
|
1 x 300 |
1 x 400 |
1 x 600 |
| 1-1/4
x 150 |
1-1/4 x 150 |
|
|
|
| 1-1/4
x 300 |
|
1-1/4 x 300 |
1-1/4 x 400 |
1-1/4 x 600 |
| 1-1/2
x 150 |
1-1/2 x 150 |
|
|
|
| 1-1/2
x 300 |
|
1-1/2 x 300 |
1-1/2 x 400 |
1-1/2 x 600 |
| 2
x 150 |
2 x 150 |
|
|
|
| 2
x 300 |
|
2 x 300 |
2 x 400 |
2 x 600 |
| 2-1/2
x 150 |
2-1/2 x 150 |
|
|
|
| 2-1/2
x 300 |
|
2-1/2 x 300 |
2-1/2 x 400 |
2-1/2 x 600 |
| 3
x 150 |
3 x 150 |
|
|
|
| 3
x 300 |
|
3 x 300 |
3 x 400 |
3 x 600 |
| 3-1/2
x 150 |
3-1/2 x 150 |
|
3-1/2 x 400 |
3-1/2 x 600 |
| 3-1/2
x 300 |
|
3-1/2 x 300 |
|
|
| 4
x 150 |
4 x 150 |
|
|
|
| 4
x 300 |
|
4 x 300 |
|
|
| 5
x 150 |
5 x 150 |
|
|
|
| 5
x 300 |
|
5 x 300 |
|
|
| 6
x 150 |
6 x 150 |
|
|
|
| 6
x 300 |
|
6 x 300 |
|
|
| 8
x 150 |
8 x 150 |
|
|
|
| 8
x 300 |
|
8 x 300 |
|
|
| 10
x 150 |
10 x 150 |
|
|
|
| 10
x 300 |
|
10 x 300 |
|
|
| 12
x 150 |
12 x 150 |
|
|
|
| 12
x 300 |
|
12 x 300 |
|
|
|
| INERTEX® is a registered trademark
of INERTECH INC. |
|
